The machine can be set using 2 different modes. In automatic mode the material is placed onto the initial dual weigh pans to be processed. The weight of bales, for example, 10 or 12kg has been predetermined by the operator when weighing. On reaching the desired weight the material is fed onto the infeed conveyor, this conveyor incorporates a dual set of photo electrics to hold the material in a holding area ready to feed into the baler hopper. Within the main hopper is a secondary holding area, when required the material is fed into the baler automatically and the cycle commences. At one time 5 bales preweighed will be within the system. The machine cycles and the bale is pushed into the ejector chamber, the next bale pushes the bale from the chamber into a bag. This cycle is complete within 18 seconds, achieving 200 bales per hour.
The baler may also be used in manual if a slower process or operator training is taking place. The process is just as above, however the operator weighing the material pushes a button once the material is weighed to signal the control system. The operator fitting the bag also pushes a button to signal the machine that he/she is ready to receive another bale.
• High production up to 200 packs per hour
• 2 off Integrated digital weigh pans
• 2 or 4person operation
• Low cost packaging
• 50 storage saving
• Easily stacked onto standard pallets
Available in 10kg - 201b, 12kg- 251b and 25kg -501b sizes, this extremely cost effective cut wiper machine is fabricated by means of standard sections.
Contact the seller
SRS Auto Pack system