Power supply unit for calibrators / sensors BP-516
- Customer pickup,
- In detail
- Country of manufactureRussia
- Устройства зарядные для датчиков
Organization of power supply for electronic units of verified sensors and calibrators.
Produced according to TU 4276 - 001 - 2160758 - 2004
The unit consists of a step - down transformer and two independent channels, each of which is a linear stabilized DC power supply. The output voltages are 12 and 24 V. The channels are galvanically isolated and protected against overload and short circuit. Overload or short circuit on both channels simultaneously does not lead to failure of the power supply.
The block contains a 430 ohm resistor to simulate a sensor load.
Units with other output voltages and load currents, as well as with different levels of operation of the protection circuit, current limitation and short - circuit current value can be made on request.
Main technical characteristics
|AC supply voltage range, V||187 . . . 242|
|AC supply voltage frequency, Hz||49 . . . 51|
|Power consumption, VA||7.0|
|Number of channels||2|
|Output voltage stabilization class||1.0|
|Change in the value of output voltages at maximum load current caused by a change in supply voltage within acceptable limits, %||no more than ± 0.1|
|Changes in the value of output voltages caused by a change in the load current from 0 to the maximum value, % , of the nominal voltage value||no more than ± 1.0|
|Changes in the value of the output voltage caused by a change in the ambient temperature within the operating temperature, % , of the nominal voltage value for every 10 ° С||no more than ± 0.1|
|Output voltage ripple, % , of the rated voltage||no more than ± 0.1|
|Dielectric strength between input power channel and output channels, V||3000|
|Dielectric strength between output channels, V||500|
|Structural performance||plastic case|
|Overall dimensions, mm||74 × 134 × 77|
|Channel||Output voltage, V||Maximum load current per channel, mA||Protection operation current (no more), mA||K3 current (no more), mA|
|Calibrator Power||11.75 . . . 12.25||60||80||45|
|Sensor power||23.75 . . . 24.25||50||75||35|
|Ambient temperature, ° С||−10 . . . + 50|
|In terms of resistance to climatic influences during operation, it corresponds to the execution group, according to GOST R 52931 - 2008||C3|
|In terms of resistance to mechanical stress during operation, it corresponds to the group, according to GOST R 52931 - 2008||L3|
|Protection against dust and moisture, according to GOST 14254 - 96||IP52|
|Warranty period of operation, months||36 from the date of commissioning, but not more than 42 from the date of manufacture|
Contents of delivery
|BP - 516||1|
|Passport, Operation manual||1|
|Connecting wire||"banana, banana" - "banana, banana"||1||to connect the calibrator|
|Connecting wire||"banana, banana" - "crocodile, crocodile"||1||for sensor connection|
Designation when ordering
|BP - 516||360|
- Additional technological operating time 360 hours.
- BP - 516 Declaration of conformity TR CU 020/2011 "Electromagnetic compatibility of technical equipment" 01/22/2025 (RU)
- BP - 516 Declaration of Conformity TR CU 004/2011 "On the safety of low - voltage equipment" 01/22/2025 (RU)
- BP - 516 Passport, Operation manual 05.06.2018 (pdf)
1 - PC 5.5 / 2.1 plug for connecting the calibrator power supply.
More details at http://www.eni-bbmv.ru/