- Country of manufactureRussia
ATTENTION! The winch is supplied with an unadjusted brake.
The winch is not designed to lift people.
Electric mounting winch type LMm is designed to provide lifting and transport operations in the metallurgical and mining industry, at construction sites, production, as well as for the assembly of lifting devices. The winch meets the professional requirements for lifting equipment.
The winch consists of a drum with a support, a gearbox, an electric motor, a shoe brake, a clutch and a starting equipment installation. The units are mounted on a common welded frame. The working body of the winch is a drum used for winding the rope. A drum of a welded structure is mounted on the output shaft of the gearbox on one side and on a support frame on the other. The torque is transmitted to it from the electric motor through a spur gearbox.
Fastening of the rope to the drum is carried out using fastening strips The winch is controlled using a post with three buttons mounted in the electrical equipment box.
The winch is designed to work under the following conditions:
- environment - not explosive;
- ambient temperature from - 20 o С to + 40 o С;
- working position - mounting on a horizontal platform;
- climatic modification of winches - U2;
- operating mode - easy;
- operating voltage 380V, current frequency 50 Hz.
The mass of the load to be lifted must not exceed the rated lifting capacity of the winch. The rope must be securely fastened. When the rope is completely unwound, no more than two turns of the rope should remain on the drum.