Dimming Electronic Ballast for Fluorescent Lamp
- Customer pickup,
- Courier
- In detail
- BrandLAMP
comply with IEC60929 Annex E by using the dimming control
signal of dc voltage from 110V. ECONO-WATD dimmable
ballast can dim fluorescent light smoothly when connected with any
dc voltage source. The dimming range is designed perfectly which
give light output from 1 to 100% for T5 lamp and 5% to 100%
for T8 lamp. Although, the dimming range of small wattage TC
lamps such as 7W to 13W will be from 10% to 100%. However,
the higher wattage TC lamp from 18W to 42W dimming range
will be at 5% to 100%. Ballast also designed to accommodate
long lamp life with the super soft start function when switched on at
any light level. ANALOG DIMMING has been certified on safety
- IEC61347-1, IEC61347-2-3, TIS885-2532; EMC EN55015,
EN55022, EN61000-3-2, EN61547, TIS1955-2542; and
performance - TIS1506-2541. Ballast is mark EEI=A1 for energy
efficiency index, the highest level of the index. The maximum
lamp wattage for the ANALOG DIMMING single lamp ballast is
110W T12 lamp and the maximum lamp wattage for dual lamp
is 2x58W lamp. In addition the ANALOG DIMMING BALLAST
always controlled by a scene processor in a theater, convention
hall, meeting room and bedroom. However, when connecting
the ANALOG DIMMING BALLAST with the simplest controller of
ECONO-WATD, analog dimming control switch, it is also capable
to give you a present mood and scene.